9号彩票

行业动态【ENTERPRISE NEWS】

当前位置:网站首页 > 新闻资讯 > 行业动态
  • 轻质隔墙板有几个主要施工要点
  • 本站编辑:杭州久泰建材有限公司发布日期:2018-08-14 17:05 浏览次数:
  轻质隔墙板是一种新型节能墙材料,它是一种外型像空心楼板一样的墙材,但是它两边有公母隼槽,安装时只需将板材立起,公、母隼涂上少量嵌缝砂浆后对拼装起来即可。那么,轻质隔墙板的施工主要有几个要点呢?我们一起来看看吧!
 
  Lightweight partition board is a new type of energy-saving wall material. It is a kind of wall material with the appearance of hollow floor. But it has male and female falcon grooves on both sides. When it is installed, only the board is erected, and the male and female falcons are coated with a small amount of slotted mortar. So, what are the main points in the construction of light partition panels? Let's take a look together.
 
  1、厨卫间、衣帽间深度必须满足台面石要求。
 
  1, kitchen and toilet rooms must meet the requirements of countertops.
 
  2、门洞处必须有门垛。
 
  2, doorways must have door pits.
 
  3、尽量选用T形板、L形板处理多块墙板交接部位,避免阴角开裂。
 
  3, try to use T - shaped plate and L - shaped plate to deal with multiple wall panels to avoid the corner cracking.
 
  4、根据墙板的定位重新调整厨卫间反坎浇筑范围,避免现场切割。
 
  4, according to the positioning of the wallboard, re adjust the pouring range between kitchen and toilet to avoid site cutting.
轻质隔墙板
 
  5、厨房烟道有宽梁位置需加厚墙板保证抽油烟机烟管安装。
 
  5, the kitchen flue has wide beam position, thick wall panels are required to ensure the installation of smoke pipes.
 
  6、根据水电管线、底盒定位调整排版,避免跨缝安装。
 
  6, according to the location of the water and electricity pipelines and bottom boxes, adjust the typesetting so as to avoid cross seam installation.
 
  7、将强弱电箱尽可能在剪力墙或构造墙中预埋,避免后期塞填开裂。
 
  7, the strong and weak electric boxes can be embedded in shear walls or structural walls as far as possible, so as to avoid later plugs and fill cracks.
 
  以上七点就是关于轻质隔墙板的主要施工要点了,若大家有认为有任何不准确的地方,欢迎指出!
 
  The above seven points are about the main construction points of lightweight partition panels, if you think there are any inaccuracies, welcome to point out!
友情链接:9号彩票  八八彩票  金巴黎彩票  聚富彩票  广发彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!